Charging 2 in 1 Cable Stand

A charging cable and a phone stand in one piece of hardware. The cable runs Type-C to Type-C and supports up to 240W Power Delivery, which covers phones, tablets and USB-C laptops from the same lead rather than keeping a separate cable for each.

The built-in metal stand is what separates this from an ordinary cable. It rotates a full 360 degrees and adjusts freely, so the phone can sit in portrait for messages or landscape for video, and stay propped at a readable angle while it charges instead of lying flat on the desk.

The connector enters at 90 degrees. That keeps the cable running parallel to the edge of the device rather than sticking straight out, which reduces strain on the charging port and stops the plug being levered sideways every time the phone is picked up.

The cable itself is woven nylon rather than bare PVC, so it resists the fraying that normally starts just behind the connector.

Suited to desk setups, gaming, video calls and anywhere a phone needs to stay both charged and visible.

How to use

1. Plug the USB-C end into a wall charger, power bank or laptop port.
2. Connect the other end to your device. The angled connector should sit flush along the edge of the phone.
3. Fold out the metal stand and rotate it to the angle you want. It holds in both portrait and landscape.
4. To reach full 240W speeds, the charger at the wall must also support Power Delivery at that rating. The cable passes through only what the charger supplies.

Care: unplug by gripping the connector housing rather than pulling the cable, and avoid folding the stand against its hinge stops.