Dual Lens Solar Camera 4K WiFi Outdoor

An outdoor security camera that needs no wiring at all. The built-in battery is topped up continuously by the attached solar panel, so once it is mounted there is nothing to plug in, nothing to trench a cable to, and nothing to bring down and recharge.

The dual lens system is what separates this from an ordinary camera. Two lenses record at once, one covering a wide view of the whole area and a 2K secondary lens for closer detail, so you get the context and the identifying detail from the same event rather than choosing between them when you set the camera up.

Video runs at 4K 8MP, sharp enough that a face or a number plate stays readable when you zoom into the footage after the fact, which is the only moment the resolution actually matters.

It connects to home WiFi for remote viewing and alerts through the iCSee app, and the weatherproof housing handles rain, dust and temperature swings.

Best suited to driveways, gardens, gates, sheds and outbuildings, exactly the places where running mains power would be the expensive part of the job.

How to use

1. Charge the camera before mounting so it starts with a full battery rather than relying on the panel from day one.
2. Install the iCSee app and connect the camera to your WiFi network while it is still within easy reach.
3. Mount the camera where the solar panel gets several hours of direct sun each day. A shaded panel is the main reason these cameras run flat in winter.
4. Angle the wide lens to cover the area and the secondary lens toward the point people actually pass, such as a gate or a door.
5. Check the live feed from the app before you finish, so you can correct the aim while the ladder is still up.

Care: wipe the solar panel clear of leaves, dust and snow, and clean the lens housing occasionally so night footage stays sharp.