3 in 1 Rotatable Socket Extender

Most outlet adapters fail for one reason: the bulky ones block the socket next to them, and the rigid ones will not fit behind furniture. This 3-in-1 socket extender solves both.

The 180 degree rotatable design lets you angle each connection away from obstructions, so plugs sit flat against the wall instead of sticking straight out. That means it works behind a sofa, a bed, a bookcase or a desk pushed up against the skirting board, and it stops a single chunky adapter from monopolising a double socket.

One outlet becomes three usable connections. Enough for a lamp, a phone charger and a laptop brick at a bedside, or a monitor, a dock and a desk light in a workspace, without running an extension lead across the floor.

The body is compact and light, so it packs easily for travel and hotel rooms where sockets are always in the wrong place and always too few.

Available in both US and EU plug formats, and in a range of colours, so you can match the version to the room and the region you actually use it in.

How to use

1. Choose the version that matches your region, US or EU plug.
2. Plug the extender directly into a standard wall outlet. No tools, wiring or installation are needed.
3. Before connecting anything, rotate each socket to the angle you want. Angling them downward or sideways is what lets the plugs sit flat so furniture can stand close to the wall.
4. Connect up to three devices.
5. Check the combined load before use. This is an outlet extender, not a surge protector, so keep it to lamps, phone chargers, laptops and small electronics. Do not run high-draw appliances such as heaters, kettles, irons or power tools through it.

Care: plug it directly into the wall rather than into another extension lead, and unplug it by gripping the body rather than pulling on a connected cable.