K9 Bluetooth Microphone, Wireless Lavalier Mic for iPhone and Android Recording

Two transmitters and one receiver, which is the part that matters. A single-mic kit forces one person to hold the microphone and pass it back and forth. This one clips a mic to each speaker, so an interview, a two-person podcast or a piece to camera with a guest records both voices cleanly at once.

Setup is a plug and a press. The receiver connects through the Lightning port and starts working immediately, with no Bluetooth pairing and no app to install. That is the difference between recording something the moment it happens and missing it while troubleshooting a connection.

The omnidirectional mics use advanced noise reduction to hold the voice steady against background noise, so a cafe, a street or a busy venue does not make the audio unusable.

Signal range is up to 50ft, enough to leave the phone on a tripod and walk a room while still recording clean sound.

Battery life runs up to 6 hours, and the transmitters and receiver can charge at the same time, so the whole kit is ready in one session rather than in sequence.

Well suited to vlogs, podcasts, interviews and online tutorials. The mics clip to a shirt or can be held by hand.

How to use

1. Charge both transmitters and the receiver before first use.
2. Plug the receiver into your iPhone's Lightning port. It connects on its own with no pairing step.
3. Clip one transmitter to each speaker, roughly a hand's width below the chin.
4. Open your recording app and check the levels for both voices before starting.
5. Keep both speakers within 50ft of the phone for a stable signal.

Care: store the receiver in its case so the Lightning pins stay clean, and recharge between uses rather than storing the units flat.