Magnetic 3 in 1 Wireless Charger Station With Extension Cords
One power adapter, three Apple devices. This magnetic charging station takes an iPhone, an Apple Watch and AirPods at the same time, replacing the three separate chargers and three separate cables that normally occupy a nightstand or a desk.
Magnetic alignment does the work of positioning the phone. The iPhone snaps to the correct spot rather than being nudged around until charging starts, which is the usual failure of flat wireless pads left in the dark.
Charging runs at up to 15W for iPhone, 5W for AirPods and 2.5W for Apple Watch. It is built for iPhone 12 through 17.
The phone section doubles as an adjustable stand, so the screen stays visible and at a readable angle while charging. That makes it usable as a bedside clock, a video stand during calls, or a second screen at a desk.
An 80cm retractable Type-C cable is integrated into the unit, so there is no loose lead to coil up when packing. The whole station folds flat, which is what makes it realistic to travel with rather than something that only ever lives on one desk.
Safety protection covers over-current, over-heating, short circuits and foreign object detection, the last of which stops the pad pushing power into a coin or key left on the surface. The unit is CE, RoHS and FCC certified.
How to use
- Unfold the station and extend as much of the 80cm Type-C cable as you need.
- Connect the cable to a USB-C power adapter. To reach full speed on all three devices at once, use an adapter rated for the combined load; a low-wattage plug will slow everything down.
- Place the iPhone against the magnetic pad and let it snap into position, then adjust the stand angle.
- Set the Apple Watch on its charging point and the AirPods case on the base pad.
- Fold the station flat for travel, drawing the cable back in steadily rather than releasing it under tension.
Care: keep the magnetic surface clear of coins, keys and cards, and remove thick or metal-backed phone cases if charging does not start.