Magnetic Phone Charging Cable Self Winding

A charging cable that puts itself away. The self-winding design retracts the cable back into its housing when you are finished, so it never ends up knotted at the bottom of a bag or tangled behind a desk. Pull out only the length you need and let the rest stay coiled.

The magnetic connector snaps onto the charging tip with a firm hold, letting you connect one-handed and in the dark without hunting for the port. Because the tip stays seated in the device, the port itself stays covered and protected from dust and pocket lint.

Three connector tips are included: Lightning, Micro USB and USB Type-C. That covers iPhones, Android phones, tablets, e-readers and older accessories from a single cable, and you swap tips instead of replacing the whole cable when you change devices.

Charging runs at 2.4A, fast enough to meaningfully cut top-up times over a standard 1A cable, whether you are refilling a phone before heading out or keeping a tablet going through a work session.

Built for people who want a tidy desk, a clean bedside table and a bag without a nest of cords in it. Equally useful for travel, where one cable and three tips replace the handful you would otherwise pack.

How to use

1. Choose the connector tip that fits your device: Lightning, Micro USB or USB Type-C.
2. Insert the tip into the charging port and leave it in place. It stays there between charges and keeps dust out of the port.
3. Pull out only as much cable as you need. The rest stays wound inside the housing.
4. Bring the cable head near the tip and it snaps on by itself.
5. When you finish, detach the head and the cable retracts back into the housing on its own. Let it draw in steadily rather than releasing it under tension.

No apps, drivers or pairing are needed.

Care: do not pull the cable beyond its full extended length, as forcing the retraction mechanism is the most common way these cables fail.